ASTM D143

Standard Methods of Testing Small Clear Specimens of Timbers

ASTM D198

Static Tests of Timbers in Structural SizesExcluding Section 36

ASTM D1037

Wood Based Fiber and Particle Panel Materials

ASTM D1761

Standard Test Methods for Mechanical Fasteners in Wood

ASTM D2395

Standard Test Methods for Specific Gravity of Wood & Wood Based Materials

ASTM D2718

Standard Methods of Testing Plywood in Rolling Shear

ASTM D2719

Standard Methods of Testing Structural Panels in Shear Through Thickness

ASTM D2915

Standard Practice for Establishing Allowable Properties for Visually graded Dimension Lumber from In-Grade Tests of Full-Size Specimens.

ASTM D3043

Standard Methods of Testing Plywood in Flexure

ASTM D3044

Standard Test Method for Shear Modulus of Plywood

ASTM D3500

Standard Methods of Testing Plywood in Tension

ASTM D3501

Standard Methods of Testing Plywood in Compression

ASTM D4442

Standard Test Methods for Moisture Content of WoodExcluding Method
C – Distillation

ASTM D4444

Standard Test Methods for Use and Calibration of HandHeld Moisture Meters

ASTM D4761

Mechanical Properties of Lumber and Wood-Based Structural Material

ASTM D5456

Standard Specification for Evaluation of Structural Composite Lumber Products

ASTM D5055

Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists

ASTM E72

Standard Methods of Conducting Strength Tests of Panels for Building Construction

ASTM E73

Standard Practice for Static Load Testing of Truss Assemblies

ASTM E196

Standard Practice for Gravity Load Testing of Floors and Flat Roofs

ASTM E455

Static Load Testing of Framed Floor or Roof Diaphragm Construction for Buildings

ASTM E529

Flexural tests on Beams and Girders for Building Construction

ASTM E564

Standard Method of Static Load Test for Shear Resistance of Framed Walls for Buildings

ASTM E661

Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact loads

ASTM E695

Relative Resistance of Wall, Floor, and Roof Construction and Impact Loads

ASTM E1080

Static Load Testing of Wood – Framed Truss Assemblies

BS 5268 Part2

Timber and/or Plywood Structures

BS 6566

Plywood

CSA 0121

Douglas Fir Plywood

CAN/CSA 0122

Structural Glued-Laminated Timber

CSA 0151

Canadian Softwood Plywood

CSA 0153

Poplar Plywood

CSA-0325

Test Methods for Construction Sheathing

CSA-0437

Test Methods for Waferboard and Strandboard

CAN/CSA-0442

In-Grade Bending Tests of Lumber

CAN/CSA S442

In-Grade Tension Tests of Lumber

CSA S307

Load Test Procedures for Wood Roof Trusses for Houses and Small Buildings

COFI Test Procedures

Bearing Test

DIN 53255

Bonding Strength

DIN 68705

Plywood

EN 310

Wood-Based Panels – Determination of modulus of elasticity in bending and bending strength – Determination of characteristic values of mechanical properties and density

EN 314 – 1 & 2

Plywood – Bonding Quality, Part 1: Test methods, Part 2: Requirements

EN 789

Timber Structures – Test Methods – Determination of Mechanical Properties of Wood-Based Panels

FP Innovations-Forintek/Canada Corporation SP-18R

Evaluation Procedures for Synthetic Patching Materials for Repairs to Plywood Panels

ISO 3129

Wood Sampling Methods and General Requirements for Physical and Mechanical Tests

ISO 3130

Wood – Determination of Moisture Content for Physical and Mechanical Tests

ISO 3131

Wood – Determination of Density for Physical and Mechanical Tests

ISO 3805

Plywood – Determination of Density

ISO 3806

Plywood – Determination of Moisture Content

ISO 8375

Solid Timber in Structural Sizes – Determination of Some Physical and Mechanical Properties

ISO 8982

Plywood – Determination of Physical and Mechanical Properties for Structural Purposes

ISO 9425

Wood-Based Panels – Determination of Moisture Content

ISO 9427

Wood-Based Panels – Determination of Density

ISO 16978

Wood-Based Panels – Determination of Apparent Modulus of Elasticity in Bending and of Bending Strength

ISTA Procedures 1, 7C

Incline Impact Test, Static Compression Test, Drop Test

Voluntary Product Standard PS1

Construction and Industrial Plywood.

Voluntary Product Standard PS2

Performance Standard for Wood-Based Structural Use Panels

*********معرفی استانداردهای پرکاربرد در صنایع چوب و کاغذ********